One of the main ways to noticeably change the power when the load is disconnected is to switch the connection circuit of the source and receiver from the star to the triangle and vice versa.
When you turn on the beginning of one phase with the end of the other with the formation of a closed loop get the connection triangle.
Pic 1
Triangle is connected to the receiver phase, i.e. The three phases of the receiver are connected between the linear wires in Figure 1.
The phase voltages of the receiver are equal to the corresponding linear voltages of the power supply:
phase currents:
Positive direction of phase voltages
coincides with the positive direction of the phase currents.
When the receiver triangle connects, a closed loop is obtained, therefore:
Il = Uf
Phase voltages are defined as linear oscillators:
Comments