You get a bonus - 1 coin for daily activity. Now you have 1 coin

The first generation of computers 1948 - 1958

Lecture



Without taking into account the elemental base of computers, one could say that the first computer was developed by Alan Turing “Kolos” developed back in 1943. This machine was designed to decrypt German secret messages from the Second World War. It was one of the first attempts to create a universal programmable machine. However, today's definition of the computer did not match.

Component base of computers of the first generation are vacuum tubes. They were intended to solve scientific and technical problems. These machines possessed the military departments and state institutions. Their cost was so high that even large corporations could not acquire them. These machines were of enormous size and weighed about 5–30 tons, occupying an area of ​​several hundred square meters. So they often needed separate rooms, and sometimes entire buildings. Consumer power of such machines was measured in hundreds of kilowatts of energy. For example, the machine ENIAC consumed 150 kW. Some of them operated with decimal numbers, such as Mark-1 , rather than binary ones like existing machines.

The computing power was only a few thousand operations per second. For example, such operations as addition, subtraction took several seconds. The division and multiplication took up to several tens of seconds. And it took more than a minute to calculate the logarithm or trigonometric function.

Element base of computers of this generation were: electromechanical relays, which quickly broke down and created a lot of noise like in the production workshop, electronic vacuum tubes whose service life did not exceed several months. There were tens of thousands of them in the car. So every day, something broke.

The first generation of computers 1948 - 1958
Maurice Wilks next to the EDSAC RAM
The first-generation computers were fully programmable machines. That them also distinguished from arithmometers and calculators. But programming on such computers was quite difficult. Because there were no high-level languages ​​and there were no low-level languages ​​(assembler) either. All computer instructions were given in machine code. Not understandable to a person not dedicated. To work on such a computer, it was necessary to be not only a professional programmer, but also an experienced electronic engineer. The machine was programmed by changing the position of the switches and toggle switches on its front panels, which were on almost the entire body of the machine. The modification of the program was equivalent to a ten-minute gymnastics charge.

The amount of RAM ranged from 512 to 2048 bytes. The memory was a tube filled with mercury, the crystals spread through the tube and stored information. At the end of the first generation and at the beginning of the second, they began to release memory on magnetic cores.

The first-generation computers implemented the fundamental principles of building computers. One of the major drawbacks of these computers is the inconsistency of the arithmetic speed - the logic device, the control device and the RAM due to the different components.

The first generation of computers 1948 - 1958
Memory on ferrite cores was used in the first generation of machines.

All performance was determined by the slowest element - the internal memory which reduced overall efficiency. During the first generation, they tried to remove this disadvantage due to the asynchronous operation of the components. Introduce the concept of a buffer when the transmitted data was copied to the buffer, freeing the device for the following operations. Even then, the own memory was used to operate the I / O device.

A big disadvantage of the first generation is that initially these machines were designed to perform arithmetic tasks. And the decision on them of any analytical tasks was very time consuming.

Computers of the first generation in Russia appeared late. These include MESM - Small Electronic Counting Machine developed at the Institute of Electrical Engineering of the Ukrainian Academy of Sciences under the guidance of S.А. Lebedeva 1950. The first generation also includes such machines as BESM, Ural, M-2, Strela.

The first generation of computers 1948 - 1958
Domestic computer of the first generation BESM-2. It contained about 4,000 electronic tubes. It was assembled on three racks; one of them was a magnetic random-access memory rack and a control panel.

See also


Comments


To leave a comment
If you have any suggestion, idea, thanks or comment, feel free to write. We really value feedback and are glad to hear your opinion.
To reply

History of computer technology and IT technology

Terms: History of computer technology and IT technology